Austin Concrete CompanyAustin Concrete Company

Concrete Floor Installation in Austin MN - a slab ready for the tile, wood or carpet

Old basement floor cracked and uneven, or a new space waiting on a slab? We pour it to suit the flooring you're putting on top.

Freeform swimming pool with a bright blue stamped concrete deck beneath a screened patio enclosure.

What goes into a new concrete floor in Austin?

Concrete floor installation in Austin, MN is pouring a new slab for a basement, garage, shop or addition, and at Austin Concrete Company we build it so it sits flat, cracks where it's planned to and is ready for the flooring you put on it.

The first thing I'll ask is whether the floor is going into a new home or replacing one in a house you already live in, because the state's radon rules for new homes change what goes under the slab. The price mostly follows the size of the floor and how much has to happen underneath it, and the schedule turns on the weather, the permit and any inspections. If there's a back stoop or basement entry that needs work too, we can plan concrete steps along with it, and your estimate gives you the figure for your own job.

How do you know your concrete floor needs replacing?

Most people call us when the old floor starts fighting their plans for the room, or when there's no floor there yet at all. Here's what we usually hear about, and what's usually behind it.

  • Cracks that keep getting wider, or one side sitting higher, usually mean the base underneath has settled.

  • Water pools in low spots on a garage or shop floor, which usually means the slab has sunk.

  • Tile popping loose or grout cracking in a line usually means the slab below it is moving.

  • Flooring lifting, glue letting go or a damp smell under carpet usually points to moisture coming up through the slab.

  • A dusty, powdery top that keeps shedding usually means it was finished poorly or poured in midday heat.

  • You're finishing a basement or building an addition, and bare dirt or a patched old slab won't take new flooring.

Call before the new flooring goes down, because a slab that's moving or damp is far easier to sort out now than under fresh tile.

What happens when you call about a concrete floor in Austin?

Here's how a floor job runs with us, start to finish. You deal with me from the first call, and I'm there with our crew when the concrete shows up.

  1. Call and I come out

    You call, and I come out myself to measure the space, look at what's there now and talk through what you want the floor to do. Our own crew does the work with me running it, so the person you talk to is the one at the pour.

  2. Get a written estimate

    You get a written estimate that spells out each part, from tear-out and base work to the layers under the slab and the finish, so nothing hides inside one lump number. If a cheaper option won't hurt how the floor holds up, I'll tell you, and if it will, I'll tell you that too.

  3. We line up permits and inspections

    Once you say go, we handle the permit paperwork and call Gopher State One at least 48 hours before digging so buried lines get marked, as the city requires. On a new home in Austin, the city inspects the underground plumbing and the radon membrane before the floor goes in, so we set the pour date around those visits.

  4. Pour, finish and walk through

    I'm on site with our crew from the pour through the finish, because the timing of the finishing work decides how hard and clean the top ends up. Before we pack up, we walk the floor with you and go over how to look after it.

Get a written estimate for your new concrete floor

Send the form and we'll reply within one business day to set a time for me to come out. The on-site estimate is free, there's no obligation, and you get a written quote that spells out what's included.

Hours
Mon–Fri: 7 AM–11 PM, Sat–Sun: 8 AM–10 PM

Base, layers and joints under a concrete floor

The part of a floor that decides how it holds up is the part you never see. We dig out to the subgrade, the ground the slab sits on, and pack a proper base instead of raking loose dirt level, because a floor settles right along with whatever's under it. If the budget's tight, that's the last place I'd cut, since you can redo a finish later but not the base.

What's going on top decides what goes underneath, so I ask about your flooring before we plan anything. Indoors we usually trowel the surface smooth for tile or wood, while a garage apron or a concrete pool deck gets a broom finish, a light brushed texture for grip. Rebar, steel rods tied into a grid inside the slab, helps hold the floor together and level if it does crack.

No concrete floor is completely crack-free, so the question worth asking any contractor is where the joints go. Control joints are straight grooves that give the slab a planned place to crack, and we lay them out with you before the pour, under a wall line or along a tile layout, so any cracking lands where you expect it. We cut them on time, too, since a late cut lets the floor crack on its own first.

Concrete floor questions from Austin homeowners

How much does it cost to put in a concrete floor in Austin, MN?

The cost of a concrete floor comes from the size of the space, what has to come out first and how much goes under the slab, so your written estimate is the real number. Tearing out an old floor, digging out and packing a new base, and adding moisture or radon layers all add to it, while a plain troweled finish and an easy path for the truck keep it down.

Do I need a permit for a concrete floor in Austin, MN?

If the floor is part of building, altering, repairing or improving a building, the City of Austin requires a building permit before work starts, unless the job is exempt. We handle the paperwork and set up the inspections, and if it isn't clear whether yours needs one, we call and ask before we start. We do the same with the local office in Albert Lea, Stewartville, Kasson and the cities around them.

How do I know if my concrete floor needs a vapor barrier for tile or carpet?

If the floor is getting carpet, tile, wood or resilient flooring like vinyl, industry guidance calls for moisture protection under the slab, because water vapor coming up through concrete can make flooring glue fail and the floor lift or discolor. For those moisture-sensitive floors, the guidance also recommends pouring the concrete right on top of the vapor retarder, the sheet that keeps ground moisture out.

Does a new concrete floor need a radon system in Minnesota?

In a new home it does, because Minnesota requires a passive radon system under the slab, a layer of gravel or sand that lets gas move, covered by a soil-gas membrane, so radon drains from below and vents outside. The state only requires it in new homes, so for a replacement floor in an existing house it's a choice we talk through with you.

What is the best way to pour a concrete floor in cold weather?

Plan how the concrete will be protected before the pour, because it counts as a cold-weather pour when temperatures are expected to drop below 40°F while the new concrete still needs shielding from the cold. One supplier's guide also says the ground under the slab should be free of snow and ice, since a frozen base can freeze the concrete and cause finishing and durability problems. If your job lands in winter, I'll go over at the estimate how we'd protect it.

Does a concrete contractor need a license in Minnesota?

A contractor who offers more than one skill, like excavation along with concrete work, needs a license from the Minnesota Department of Labor and Industry, while one offering only a single skill such as slabs needs no state license and falls under the state's contractor registration program. We're licensed and insured, so you're covered either way.

Tell me about the floor you're planning

Call (507) 509-6215 or send the form with the room, whether it's new or a replacement, the flooring you want and a hoped-for start date, so the first visit gets straight to the useful part.

Mon–Fri: 7 AM–11 PM, Sat–Sun: 8 AM–10 PM

(507) 509-6215Request an estimate