Garage floor concrete in Austin MN - the right fix for the floor you've got
Cracked, flaking or sinking garage floor? We'll tell you straight whether it can be resurfaced or needs a new slab, then pour it right.

Should you resurface your garage floor or replace it?
Garage floor concrete in Austin, MN comes down to two jobs. If the concrete underneath is still solid, we can resurface it with an overlay, a thin new layer bonded on top, and if it isn't, we break out the old slab and pour a new one.
Most folks call me once the garage floor has started cracking, flaking where the car sits or dropping near the door, and they want to know if it's a surface fix or a whole new floor. The price moves with the size of the garage, whether the old slab has to be broken out and hauled off, how much work the ground under it needs and the finish or coating you want, while the schedule hangs on permits, inspections and the ground being ready to pour on. If a leaning retaining wall beside the drive is part of the problem, I'll look at that on the same visit. We're based in Austin and insured, we work in Albert Lea, Stewartville, Kasson and the cities around them, and your written estimate spells out what's included so you see your own number before you decide.
How do you know your garage floor needs work?
These are the things people usually notice first when they walk out to the car. Some point to a worn top that can be resurfaced, and some point to trouble under the slab.
Cracks that keep getting wider, or with one side higher than the other, usually mean the slab is moving.
A floor that's sunk near the door or along a wall often means the ground underneath settled.
Water pooling in the middle or running toward the house usually means the floor wasn't pitched to drain out.
Flaking, chipped or pitted spots where the car parks mean the top layer is wearing away, often from salt.
A dusty, powdery surface that never sweeps clean usually points to a weak top from the original pour.
A coating that peels or bubbles up can mean moisture is coming up through the slab from the ground.
If a crack is getting wider or one side keeps dropping, call (507) 509-6215 sooner rather than later, because a floor that's still sound has more options.
What happens when you call about a garage floor in Austin?
Here's how a garage floor job runs with us, from the first call to the final walk-through, so you know who you'll talk to and what you'll have in hand before you decide.
Call or send the form
I answer the phone myself and set a time to come out and see the floor. It helps if you can tell me where the cracks are, the finish you'd like and any coating or heat you're planning.
I look at your floor
I measure, take a hard look at the old slab and tell you honestly whether it's worth resurfacing or needs to come out. Then you get a written estimate that breaks out each part of the work, so you can see exactly what's driving the price.
We line up the pour
Once you say go, we set up utility locates, permits and inspections where they're needed and put the pour on the calendar. I'll tell you what the date depends on, so nothing about the schedule catches you off guard.
We pour and walk it
I'm on site with our crew from the prep through the finish, because the base and the joints are where a floor holds up or doesn't. Before we pack up, we walk the floor with you and go over how to look after it.
Get a written estimate for your garage floor
We reply within one business day to set up a free on-site visit. I'll look at the floor, and you get a written quote that spells out what's included, with no obligation to go ahead.
- Call
- (507) 509-6215
- Hours
- Mon–Fri: 7 AM–11 PM, Sat–Sun: 8 AM–10 PM
Garage floor choices, from the base to the finish
When a floor comes out, the part I care most about is the subgrade, the packed ground and gravel the new slab sits on. A lot of failed garage floors were poured on dirt that was raked level instead of dug out and packed, so they settled right along with it. If something has to give in the budget, I'd cut the fancy finish before the base, because my dad was right that concrete only gets one shot.
Where the floor gets rebar, the steel bars inside help hold it together if it cracks. Concrete does crack, so we cut control joints, shallow grooves that give it a straight line to crack along where you'll barely notice, and we cut them in time, since late or skipped joints are how cracks wander across a floor. We also check that the floor drains out the door, not back toward the house.
It's worth settling the finish early, because a broom finish, a light swept texture that gives tires some grip, and a smooth troweled finish call for different mixes. If you're planning an epoxy or similar coating, or want to heat the garage later, tell me up front, since that usually means a vapor retarder, a sheet under the slab that keeps ground moisture from coming up through it. For color or a polished look, there's our decorative concrete work.
Garage floor questions we hear in Austin
How do I know if my garage floor can be resurfaced instead of replaced?
Your garage floor can be resurfaced if the concrete underneath is still sound. An overlay fails predictably over a slab that's moving, cracks that keep opening or a poor base, so a floor like that should be planned as a full replacement. I'll tell you honestly which one yours is when I come out.
How long does a resurfaced garage floor last compared to a new slab?
A properly installed overlay is expected to last about 8 to 15 years, and a full replacement about 20 to 30. Resurfacing adds years to a floor that's still sound, while a new slab is the long-term plan. If you're staying put and your floor is borderline, I'd usually lean toward replacing it.
How much does a new garage floor cost in Austin, MN?
Across the US, an installed garage floor slab usually costs about $6 to $12 per square foot. That's a 2026 national figure, not our price, and where your floor lands depends on its size, whether the old slab comes out, how much base work it needs and the finish or coating you pick. For your own number, we'll come out and put it in a written estimate.
Do I need a permit to replace a garage floor in Austin, MN?
You may, since Austin requires a permit before work that repairs, alters or demolishes any building or structure unless the work is exempt. If you're unsure, the city's Building Inspection Department answers permit questions at (507)437-9950, and the state's garage guide lists a slab inspection once the forms and any required steel are set, before the pour. When a job needs a permit, we handle the paperwork and set up the inspections, and if it isn't clear, we call and ask before we start.
What is the best time of year to pour a new garage floor in Minnesota?
The best time is once the ground under the garage has thawed, because concrete placed on frozen soil settles when that soil thaws and can break the slab from below. We won't pour on frozen ground, so we set the date around when the base is ready. It also pays to call early, since a permit and inspection may need to fit in before the pour.
Does a contractor need a license to pour a garage floor in Minnesota?
A contractor who does only concrete work on your home can register through the state's Contractor Registration Program instead of holding a residential contractor's license, but one working in more than one special skill area needs a license. The Minnesota Department of Labor and Industry lists slabs under its masonry and concrete skill, so it's fair to ask whether your job goes past concrete into other trades. We're licensed, and your written estimate spells out what the job covers.
Other concrete work around the garage
Decorative concrete
If you'd like the garage floor or the slab outside it to look finished rather than plain, stained, colored or patterned concrete is worth a look.
Concrete retaining walls
When the garage sits on a slope and the dirt beside the driveway keeps creeping or washing down, a concrete retaining wall holds the grade in place.
Have your garage floor looked at
Call (507) 509-6215 or send the form, and if you tell me where the cracks are, the finish you want and any coating plans, I'll show up with the right questions already in mind.
Mon–Fri: 7 AM–11 PM, Sat–Sun: 8 AM–10 PM
