Austin Concrete CompanyAustin Concrete Company

Decorative concrete in Austin MN - color and texture that stand up to freeze and thaw

Plain gray patio or a tired front walk? We pour concrete with the color and texture you want, finished to wear well.

Decorative stamped concrete patio with an irregular stone pattern and rounded edge beside a black metal chair.

What can decorative concrete do for your patio, walk or driveway?

Decorative concrete in Austin, MN is concrete with color and texture added, like a stamped pattern or a chemical stain that looks a lot like natural stone, so your patio, walk or driveway looks finished instead of plain gray.

Most calls start with a patio or front walk that's plain, worn or cracked, and a homeowner who wants it to look like something more. The price moves with the size of the area, how much old concrete comes out, how much the ground underneath needs dug out and packed, and the color and pattern you pick, while the schedule turns mostly on site prep and the weather. The same color work can carry onto a wall or an indoor slab, so you can tie it in with concrete retaining walls or concrete floor installation, and your written estimate spells out each part.

How do you know your concrete is ready for a new look?

Most people call about something they keep noticing on the slab they already have, not because they read about decorative concrete. Here's what that usually looks like and what it tends to mean.

  • Your patio is solid but plain gray, and you'd like it to look more like stone or brick.

  • Old stamped or colored concrete has faded or gone chalky, which usually means the sealer wore off.

  • The surface is chipping or flaking off in thin patches, which usually means the top layer is breaking down.

  • Cracks run across the slab in random spots, a sign the joints were cut late or skipped.

  • Sections have sunk or tipped so they're uneven, which usually means the base under them settled.

  • Water pools on the patio or runs back toward the house when it rains, so the slope is wrong.

If water's running toward your house or pieces are breaking loose, call sooner rather than later, because both tend to spread and can change what the new slab needs.

What happens when you call about decorative concrete in Austin?

We're based in Austin and work in Albert Lea, Stewartville, Kasson and the cities around them, and I run every job from the first look to the final walk-through. Here's how it goes.

  1. Call and set up a visit

    You call or send the form, and I'm the one who comes out to look at the spot, take measurements and hear what you have in mind. If you've saved photos of finishes you like, have them handy, because they help me show you what fits.

  2. Compare finishes, then get pricing

    I lay out color and finish choices side by side and explain how each one wears, so the look you pick still makes sense a few winters from now. Your written estimate then spells out each part of the work, so you can see what's included and where the money goes before you decide.

  3. Prep the site and pour

    Once you say go, we call Gopher State One Call to get underground lines marked before any digging, line up permits and inspections where they're needed, and set the pour date around the weather. Then our crew digs out and packs the base, sets the forms, pours and finishes, with me on site through the finish.

  4. Walk the finished job together

    Before we pack up, we walk the job with you and go over how to look after it, from when it's ready for foot traffic to when the sealer will need a fresh coat.

Get a written estimate for your decorative concrete

Send the form and we'll reply within one business day to set up my visit, and the on-site estimate is free with no obligation. Mention the area, the look you want and any roof planned over a patio.

Hours
Mon–Fri: 7 AM–11 PM, Sat–Sun: 8 AM–10 PM

Color methods and mixes that suit freeze and thaw

Color goes in one of three ways. Color hardener is worked into the top and pairs color with a very durable surface, so look at it if you want a finish that takes hard wear. Integral color is mixed all the way through and works with practically any texture, while chemical stain goes on the hardened surface and looks a lot like natural stone, the one to pick if that's what you're after.

The mix matters as much as the color. Concrete that will get wet and go through freezing and thawing should be air-entrained, mixed with tiny air bubbles that give freezing water room to expand, so it's worth asking any contractor whether the mix for your slab is. I'm glad to show you what's going into yours, because a pretty surface on a mix that can't handle winter is money spent twice.

Cold weather changes the timing. Fresh concrete freezes below about 25°F, and once it freezes it can lose more than half the strength it should have reached and won't be durable, so it has to be kept from freezing for about two days after it's placed. That's the start of curing, the slow hardening that gives concrete its strength, and I'll tell you up front how we'd protect yours if the forecast turns cold.

Decorative concrete questions from Austin homeowners

Do I need a permit for a decorative patio or driveway in Austin, MN?

If a roof will go over your patio, Austin requires a building permit, and for other decorative work we check the city's permit rules before we start and handle the paperwork and inspections when one's needed. The city also says to keep a driveway out of recorded easements, and replacing city sidewalk or curb and gutter out front has to be done by a city licensed contractor.

Who is allowed to do decorative concrete work in Minnesota?

A contractor who offers only concrete work doesn't need a state residential license but falls under the state's contractor registration program, while one who offers more than one specialty, such as grading plus concrete slabs, must be licensed. We're licensed and insured, and you're welcome to ask about either when I come out.

What is the best sealer for stamped or colored concrete?

If you want richer color, a topical sealer, the kind that leaves a thin film on top, is the usual pick and the most used on stamped concrete, while most penetrating sealers leave the color as it is. How and when it goes on matters as much as which one, because too much sealer or sealer put on too early can leave the surface looking off, and penetrating sealers generally need fully cured concrete. I'll show you where sealing lands in the schedule before we start.

How do I keep decorative concrete looking good through winter?

Reseal when water stops beading on the surface and go easy on deicers, which is what one concrete supplier's upkeep guide advises. That guide recommends against deicing chemicals on outdoor concrete because they can wear down the surface over time, most of all on concrete that had too little drying time before its first freeze. We'll go over what to watch for on your slab at the final walk-through.

What causes concrete to crack, and will my new decorative slab crack like the old one?

New concrete can still crack, but most of the trouble in an old slab comes from a base that was raked level instead of dug out and packed, and from control joints, the grooves cut so the slab cracks where we choose, that were cut late or skipped. That's why we spend our time on the subgrade, the packed ground and gravel the slab sits on, and on the joints. If the budget gets tight, I'd rather go with a simpler pattern than cut corners on a base you'll never see.

How much does decorative concrete cost in Austin, MN?

There's no set price, because it comes down to the size of the area and the finish you pick, so I put a number on it only after I've seen the spot. A single color or a stain usually runs less than a stamped pattern with more than one color, and tearing out old concrete or fixing a bad base adds to it. Your written estimate spells out each part, so you can decide what's worth doing.

Talk through your decorative concrete with me

Call (507) 509-6215 or email projects@concretecompanyaustin.com, and send along any photos of finishes you like so I can bring samples that match.

Mon–Fri: 7 AM–11 PM, Sat–Sun: 8 AM–10 PM

(507) 509-6215Request an estimate